Valves adjustment

Engine valve adjustment

For the service of our car service “valve adjustment” the price in Kiev is always available. We work with cars of any brand and modification, guaranteeing the quality and high level of service. We offer professional consultations that will save your time and money.

Why might you need to adjust the engine valve? This process is most often required for cars that have been used for many years. The adjustment is made for the timely application of valves for various operating modes of the power plant.

Adjustment of the engine valves is necessary to avoid unpleasant appearance:

• incorrect operation of the power plant;
• reduced engine tension;
• zbіlshenya vytrati paliva toscho.

The adjustment process mainly involves setting the “correct” thermal gap.

Valve adjustment options available from Auto Master

What is the cost of valve adjustment? The service fee starts from 1400 hryvnia for passenger cars. For a small price, you get clear diagnostics, during which the contractors check thermal gaps for compliance with standards. The valves are visually inspected for wear and evidence of deformation.

The masters check the presence of possible leaks, adjust and set thermal gaps, and, if necessary, change the valves. Also, the car owner can see recommendations for the correct operation of the engine.

Valve adjustment, which is affordable, is a necessary procedure for many brands of cars, in which there is a system of automatic adjustment of work using additional hydraulics. It takes at least an hour, but at the same time it allows you to avoid serious problems with the future engine.

The cost of adjusting valve clearances depends on the type of engine. The cheapest option is that it is enough to remove the valve cover and adjust the valve clearances using pliers, a spanner and a screwdriver. As a mechanic, a single additional wipe can be used to lay the valve cover.

The cost of valve adjustment increases due to the need to remove the timing belt. In compliance with safety standards, after adjusting the valves, the mechanic should not install the same timing belt another time, but will lead to a significant increase in costs.

In this case, you can follow the procedure for installing thermal valve spacers with one-hour replacement of elements of the gas distribution mechanism system.

How often do the adjustment valves change?

In cars equipped with a hydraulic valve clearance system, you can forget about this problem. With mechanical controls, which are most often used by Honda, Toyota and older models of most brands, the interval is set to 10-100 thousand km.

The disintegration of the suttev, the fragments are vikorized by the mechanisms of dissemination. Some require adjustment only when replacing the timing belt, others much earlier. Information can be found in the data supplied by your car’s manufacturer, and if the car is equipped with LPG, it can speed up the hour by half.